DC-MicromotorsStepper Motors - PRECIstep Technology |
||||||||
|---|---|---|---|---|---|---|---|---|
 |
 |
Cost effective positioning drive without an encoder | ||||||
|
High power density | |||||||
|
Long operational lifetimes | |||||||
|
Wide operational temperature range | |||||||
|
Speed range up to 16 000 rpm using a current mode chopper | |||||||
| driver | ||||||||
|
Possibility of full step, half step and microstep operation | |||||||
|
Extremely low rotor inertia | |||||||
|
Ideally suited for micro-stepping applications | |||||||
| Stepper Motors - two phase | ||||||||
| Series | Diameter mm |
Length mm |
Holding torque (2 times nom. current) (mNm) |
Full steps per turn | ||||
| ADM 0620 |  |
6 | 9.3 | 0.28 | 20 | |||
| ADM 1220 | |
12 | 20 | 4.1 | 20 | |||
| ADM 1220 S | |
12 | 20 | 4.1 | 20 | |||
| AM 0820 | |
8 | 13.8 | 1 | 20 | |||
| AM 1020 | |
10 | 15.8 | 2.4 | 20 | |||
| AM 1524 | |
15 | 16.5 | 10 | 24 | |||
| AM 2224 | |
22 | 27.5 | 37 | 24 | |||
| AM 2224 R3 | |
22 | 30.7 | 37 | 24 | |||
| Lead Screws | ||||||||
| Series | Diameter mm |
Pitch mm |
Precision (per pitch) µm |
|||||
| M1.2 x 0.25 x L1 | |
1.2 | 0.25 | < 0.5 | ||||
| M1.6 x 0.35 x L1 | |
1.6 | 0.35 | < 0.5 | ||||
| M2 x 0.2 x L1 | |
2 | 0.2 | < 0.5 | ||||
| M2.5 x 0.25 x L1 | |
2.5 | 0.25 | < 0.5 | ||||
| M3 x 0.5 x L1 | |
3 | 0.5 | < 0.5 | ||||
| Drive Electronics | ||||||||
| Series | Drive Type | UB VDC |
Functionality | Max. current per Phase A |
Max. Step Frequency (full step / s) |
|||
| AD_CM_M | |
電流控制 | 10...24 | full / half step | 0.5 | 6,000 | ||
| AD_VL_M | |
電流控制 | 3...14 | full / half step | 0.4 | 2,000 | ||
| AD_VM_M | |
電流控制 | 6...24 | full / half step | 0.5 | 2,000 | ||
| Please call or E-mail NRC for further details. | ||||||||